Carburettor

OEM-quality main jets for Keihin PWK 28mm carburettors developed for use with the Jitsie Main Jet Extension Kit Race flat-screwdriver slot for easy installation and...

For: Float bowl on the carburetor

Fuel pipe only

The Jitsie Keihin float bowl bolt has a bigger capacity than the original bolt to eliminate possible hiccups in throttle response, especially when tackling double steps.Features:* CNC machined from 7075...

Airmix screw and Idle screw for Keihin carb, 1005 aluminium with stainless steel springs, micrometric adjustment, anodised, laser logo, and all round trick looking part.

Transparent tank breather tubes to replace the original grey ones mounted on the Beta Evo.Features:* 2 transparent tubes, each 25cm long* 3x5mm* made from PVC

The original rubber connecting hose between the carburettor and the airbox on a Beta Evo is quite rigid and fits very tight, which makes mounting the carburettor a challenge. The...

The Jitsie petrol tank breather valve features a one-way valve that allows air in but prevents fuel coming out of the petrol tank when the bike is upside down.Features:* CNC...

Keihin #W9535-35000

Transparent Keihin carburetor tubes to replace the original ones.Features:* kit includes 2 transparent tubes of 10cm and 27cm long* 4x7mm* tighter fit than original to avoid the need for the...

Keihin #1022-805-7000

Keihin #1290-963-2000

Keihin #N502-52H00

Keihin #1166-818-2100

Keihin #1202-837-2000

Keihin #0405-013-1000

Keihin #W1310-080-9901

Keihin #W1362-020-9901

O-ring only

Kit includes float bowl/o-ring/bowl cap/fuel pipe exit/idle jet/2x screws Keihin #N350-03A00

You are buying only the washer.

Keihin #W1446-231-9900 / #W1711-416-9900Kit includes air screw/spring/washer/o-ring

Main jet to set up the mixture throughout the full throttle range and especially at full throttle.Features:* suitable for (Keihin) PWK 28mm carburettors* equals or exceeds original quality* sold...

The Jitsie Keihin carburetor idle screw replaces the standard plastic idle screw and makes it possible to adjust there idle without the need for a screwdriver.Features:* CNC machined from 7075-T6...

Idle Screw SpringFeatures:* suitable for (Keihin) PWK 28mm carburettors* equals or exceeds original quality* sold per 1

Air screw washerFeatures:* suitable for (Keihin) PWK 28mm carburettors* equals or exceeds original quality* sold per 1

Keihin #W1446-231-9900 / #W1711-416-9900Kit includes air screw/spring/washer/o-ringFeatures:* suitable for (Keihin) PWK 28mm carburettors* equals or exceeds original quality* sold per 1

Single Idle screw plus spring. Fits both PWK28 and PWK38 Keihin carburettor.

DescriptionFull kit of slow jets for a Keihin PWK 28mm carburetor to perfectly set up the mixture from idle to around half throttle.FeaturesSizes: 35-38-40-42-45-48-50-52-55-58Suitable for Keihin PWK 28mm carburetors

DescriptionFull kit of 10 main jets to perfectly set up the mixture throughout the full throttle range and especially at full throttle.FeaturesSizes: 122-125-128-130-132-135-138-140-142-145Suitable for Keihin PWK 28mm carburetors

Modification to ease carburettor removal on Beta Evo 2T models.